中文 | English

 
THAT IC

THAT 5263

发布时间 : 2018-06-27 浏览次数 : 363
  • Features / Applications / Description
    filler
    filler
    FEATURES

    • Ideal mate for THAT 1580 and 1583 preamplifiers
    filler
    • Wide gain range: 0 to 51 dB in 3 dB steps
    filler
    • Wide supply range: ±5V to ±17V
    filler
    • Wide output swing: +29.6 dBu (±17V sup.) 
    filler
    • Wide input swing: +29.6 dBu (±17V sup.)
    filler
    • Low THD+N: < 0.003% @ 24 dB gain
    filler
    • Zero-crossing detector minimizes switching noise
    filler
    • Daisy Chainable SPI interface
    filler
    • Two general-purpose digital outputs
    filler
    • Small 5mm x 5mm QFN24 package

    filler

    filler Datasheet Download
    5263 Datasheet (443 kB)
    2-Channel Digital Audio Preamplifier Controller

    filler
    THAT 5263 Block Diagram

    DESCRIPTION

    The THAT 5263 is a 2-channel digital preamplifier controller intended for use with low-noise, analog, differential audio preamplifiers such as the THAT 1580 and 1583. The 5263 controls gain from 0dB to 51 dB in 3dB steps while preserving low noise and distortion. Operating from ±5V to ±17V analog supplies, it supports input signal levels as high as +29.6 dBu (at 0dB gain, ±17V supplies, and THAT1580) without an input pad. Used with a THAT 1580 preamplifier IC, equivalent input noise (EIN) at 51 dB gain is -128.3 dBu (20 Hz - 20 kHz bandwidth, 150-ohm source).

    Each 5263 channel includes a zero-crossing detector to minimize glitches (zipper noise) during gain adjustments. A built-in timer forces a gain change if no zero crossing occurs within 24 msec of a gain-change command. A busy pin (BSY) allows synchronization of external events and the 5263's own GPOs with the zero-crossing detector.

    The 5263 is controlled via an industry standard serial-peripheral interface (SPI) port. The part mates perfectly with the THAT 1580 and 1583 Differential Audio Preamplifier ICs. Together, these combinations provide high performance, space-saving solutions for digitally-controllable audio preamplifiers. However, the 5263 may also be used to control discrete pre-amplifiers.
    filler

    filler

    filler
    APPLICATIONS
    filler
    • Digitally controlled microphone preamplifiers
    filler
    • Digitally-controlled instrumentation amplifiers
    filler
    • Digitally-controlled differential amplifiers
    filler
    • Audio mixing consoles
    filler
    • Computer audio interfaces
    filler
    • Audio distribution systems
    filler
    • Digital audio snakes
    filler
    • Audio recorders 
    filler

    filler
    Key Specifications (see 5263 datasheet for complete specifications)
    filler
    fillerParameter
    filler
    Conditions
    filler
    5263
    Typical

    filler
    Units
    filler
    fillerAnalog Supply Voltage

    Referenced to AGND

    4.75 - 17

    V
    fillerDigital Supply Voltage
    Referenced to DGND
    3.0 - 3.6
    V
    fillerAnalog Supply Current
    No signal
    1.6
    mA
    fillerDigital Supply Current

    No signal

    50
    µA
    fillerMax Differential Input Level

    ±17 volt supplies, 0 dB gain

    29.6
    dBu
    fillerMax Differential Output Level
    ±17 volt supplies
    29.6
    dBu
    fillerGain Range Step Size 0 dB < Gain > 51 dB 3 dB
    fillerMax Gain Range Error 0~39 dB gain setting
    42~51 dB gain setting
    ±0.5
    ±1.0
    dB
  • Model Package Order Number Pricing
    (1000)
    Min Order
    Quantity
    Reference
    5263 24 pin QFN 5263N24-U $3.52 46 Request
    Samples
    24 pin QFN
    Tape & Reel
    5263N24-UR Contact us 2000
    158X/5263
    Demo Board
    158X/5263-DEMO $250.00 1
    filler
    All 5263 parts are RoHS compliant.
    Minimum order quantity (MOQ) is one tube or one reel. Parts must be ordered in multiples of the MOQ.
    Samples are available to qualified applicants.
    Pricing is subject to change.

    filler
  • Design Note 140   Input and Output Circuits for THAT Preamplifier ICs (244k)


  • Digitally Controlled Microphone Preamplifier Selector

    A side by side comparison of the features and specifications of our digitally controlled microphone preamplifier chip sets.


    158X/5263-DEMO Digitally-Controlled Mic Preamp Demo Board - This THAT Digitally-Controlled Mic Preamp Demo Board (US$250) allows developers to evaluate the performance of the THAT5263 IC. The demo board provides a balanced audio input on a Neutrik "combo" connector with 48V phantom power, and a balanced audio output on XLR and ¼" TRS connectors. The supplied graphical user interface (GUI) controls all functions in the 5263 chip via USB. A prototyping area is available for adding or modifying circuitry. See the 5263-DEMO Datasheet for more information.


    5263 Surface Mount Adapter Board - For our integrated circuits which are only available in surface mount packages THAT Corporation offers adapter boards which allow one of these surface-mount ICs to interface to a circuit board via traditional thru-hole mounting. These adapters make it easy for a design engineer to evaluate our surface-mount products on a prototype board without having to employ SMT technology. Adapter boards are available to qualified applicants.


    5263 Material Data Declaration Sheet

    Material Data Declaration Sheets (MDDS) disclose the hazardous materials in our integrated circuits as required by the European RoHS directive.

天津康宸科技有限公司

电话:022-24210736;022-24130028

传真:022-24130020

E-Mail:sales@kangchentech.com

地址:天津市河东区六纬路99号津东大厦D座105室

邮编:300171

版权所有 Copyright(C)2019-2022 天津康宸科技有限公司